Here is a quick tutorial on how to fix black screen no picture issues and do a factory reset of your set top box if necessary.
|Your TV has no signal if you don’t have a picture and the screen is completely black.||
TV with no signal/picture
Troubleshoot your TV:
- Make sure the TV’s power is on. Press the TV’s power button. Check to see if the TV is plugged into an outlet controlled by a wall switch. If so, turn on the wall switch.
- Using the TV remote, set the channel to 3 or 4.
- Check your TV’s connection into the outlet. Re-plug your TV cord into a wall outlet, which will verify if the issue is with your TV or set-top box.
- Check to make sure your set-top box is plugged in and turned on.
- Verify that other electrical equipment in your home is working. If they aren’t, you might be experiencing a power outage.
Resetting your router and set-top box
|Resetting your Router and Set-Top Box can resolve a variety of issues such as:
If you are having any of these issues, you may need to reset your Router and Set-Top Box.
Will resetting my Set-Top Box erase the selections I have programmed into my remote?
No, all settings and selections you’ve entered such as device codes, favorite channels, and recent On Demand selections are saved and available after resetting your Set-Top Box.
Resetting your Router and Set-Top Box
Always reset your Router first and then check to see if that resolves the issue. Resetting your router may be all that is needed.
|Important note about your router|
To avoid problems with your FiOS TV service, make sure your router is plugged in and turned on at all times. Even if you are not currently using the Internet, your router still needs be turned on so that FiOS TV can function properly.
To manually reset your router:
- Unplug the power cord to your Router for 15 seconds and then plug it back into the electrical outlet.
- Wait 30 seconds and then check to see if this resolves the trouble. If you still have the problem, follow the steps below to reset your Set-Top Box.
To manually reset your Set-Top Box:
- Unplug the power cord to your Set-Top Box from the electrical outlet for 15 seconds and then plug it back in.
Note: Don’t confuse the power cord that provides electricity to your Set-Top Box with the coaxial cable that is connected to the back of your Set-Top Box. Unplugging the coaxial cable will notreset your Set-Top Box. Since many issues can occur if your coaxial cable is not securely fastened, now would be a good time to check to ensure all connections are securely connected.
- Wait for the time to appear on the front of the Set-Top Box, then power it on.
- Wait several minutes while the Interactive Media Guide updates.
- Check to see if this resolves the trouble. If you still have the problem, your Set-Top Box may need to be re-initialized. Contact the Fiber Solutions Customer Support for further assistance.